FEATURES
Auto detects brushed, brushless or sensored brushless motor typesCompatible with 4-cell NiCd or NiMH batteries up to 3S LiPo packs(11.1V)EZ-Set(R) one-touch push-button set-upThree drive profiles Sport, Race and Training modeTraining mode limits full throttle to 50% for beginning driversLocked rotor protection if vehicle is stuck or motor is boundBattery over-voltage protection triggers failsafe if maximum inputvoltage is exceededSensor phase detection protects against improperly wiring aftermarketsensored motorsSensored motor backup protection switches to sensorless operation ifmotor sensor failsAuxiliary fan output (fan not included)
| INCLUDES |
Traxxas VXL-3s Electronic Speed Control with 12 gauge motor andbattery cables, three preinstalled 3.5mm female bullet motorconnectors, Traxxas High-Current male battery connector, universalreceiver connector and instruction manual
| REQUIREMENTS |
Installing in vehicle and connecting to battery, receiver and motor
| SPECIFICATIONS |
Input Voltage 4.8 – 11.1V (4-9 NiMH, 2S-3S LiPo) Motor Compatibility: Sensorless Brushless Motor Limit: None Battery Connector: Trasxxas High-Current Motor Connectors: TRX 3.5 Bullet Connectors Motor and Battery Wires: 12 gauge Maxx ccable Continuous Current: 200A Peak Current: 320A forward and reverse BEC Current: 6.0V DC Transistor Type: MOSFET On-Resistance: 0.00075 ohms PWM Frequency: 12,000Hz Thermal Protection: Two-Stage Thermal Shutdown Weight: 3.88 oz (110g) Length: 2.29″ (58.17mm) Width: 1.54″ (39mm) Height: 1.2″ (30.48mm) including heatsink
